Sanyo VCC-XZN600P Instruction Manual page 22

2
Select [MENU] and choose "BACK" or "END" to complete the setting.
Use push-lock auto white balance (AWC) if auto trace white balance (ATW) does not reproduce a natural white
balance.
Direct the camera lens toward a white wall or anything that is white and adjust the white balance by one-push
operation.
1
Use the / button to select [WHITE BALANCE], use the
press the SET button.
The AWC SETTING screen appears.
2
Use the / button to select [AWC LOCK] and, with "SET ↓" displayed, press the SET button.
The setting changes from "
balance adjustment has been completed.
If the white balance adjustment does not reproduce the desired result, press the SET button again
with "SET ↓" displayed.
To fine-tune the white balance after the adjustment, select [GO TO MWB] using the
press the SET button.
Then, when the MWB SETTING screen appears, manually adjust the gain values of the red (R) and
blue (B) signals.
3
Select [MENU] and choose "BACK" or "END" to complete adjustment.
You can set the color temperature to a fixed value.
1
Use the / button to select [WHITE BALANCE] and use the
fixed white balance option.
Available settings:
" to " (highlighted)" in two seconds, which indicates that the white
22 / 153
/ button to choose "AWC", and
/ button to choose the desired
/ button and