Sanyo VCC-XZN600P Instruction Manual page 19

button.
The IRIS SETTING screen appears.
2
Use the / button to select [EI] and use the
The electronic iris is now enabled, controlling both the AGC circuit and the shutter speed to adjust the exposure.
Setting the electronic iris (EI) causes the following:
The [SHUTTER] (electronic shutter) setting ("SHORT" or "LONG") will be cancelled and the
[SENSE UP] (electronic sensitivity boosting) will not work.
Under extremely bright lighting, the electronic iris cannot adjust the light entering through the lens,
resulting in a phenomenon such as a smear. This may be prevented by changing the lighting angle
or other measures.
Under fluorescent lighting, the camera may cause the target images to flicker. To prevent this,
replace the fluorescent lamps with incandescent lamps.
3
Use the / button to select [IRIS STOP] and use the
The lens iris changes based on the iris stop setting.
Available settings: 1 (closes the iris = dark) to 17 (opens the iris = bright)
4
Use the / button to select [LEVEL] and use the
signal level.
Available settings: 0 (dark) to 100 (bright)
5
Select [MENU] and choose "BACK" or "END" to complete adjustment.
/ button to choose "ON".
/ button to adjust the iris stop.
/ button to adjust the level of the video
19 / 153