Sanyo VCC-XZN600P Instruction Manual page 72

ADDRESS].
4
Select [MENU] and choose "BACK" to complete the setting.
The NETWORK SETTING screen appears again.
Pressing the SET button displays the automatically assigned IP address on the IP ADDRESS SETTING screen.
Selecting [MENU] and choosing "BACK" displays the NETWORK SETTING screen again.
3
Use the / button to select [PORT], and press the
network connection.
The same procedure used on the IP ADDRESS SETTING screen can be used to set the port number.
Use the button to select the digit and use the
4
Use the / button to select [ALARM OUT], and enable/disable the alarm output by selecting
ON/OFF.
To output the alarm signal to the network, set the [ALARM OUT] option to "ON".
5
Select [MENU] and choose "BACK" or "END" to complete the setting.
button to set the port number used for
/ button to enter the port number, and press the
72 / 153
button.