Sanyo VCC-XZN600P Instruction Manual page 89

Television system
Image sensor
Effective pixels
Scanning system
Synchronization method
Video output
Horizontal resolution
Lowest image illumination
Video S/N ratio
Lens
Electronic zoom
Focus
Day/Night function
Backlight compensation
White balance
AGC gain
Aperture compensation
Gamma correction
Electronic shutter
Camera titles
Privacy mask
Electronic sensitivity
boosting
Electronic iris
Image stabilizer
Mirror image (Invert)
function
Motion sensor
Storable camera settings
Setting method
Alarm input
Alarm output
Focus/Zoom control
Network
Operating ambient
temperature/humidity
Power source
Power consumption
Dimensions
NTSC/PAL color standards
1/4" interline transfer CCD
NTSC: 768 (Horizontal) x 494 (Vertical)
PAL: 752 (Horizontal) x 582 (Vertical)
2:1 interlaced, 525 lines (NTSC)/625 lines (PAL)
Internal synchronization/Line lock (with vertical phase adjustment)
1.0 V (p-p)/75Ω, BNC connector
540 TV lines, typical
0.8 lx (at F1.4, color mode, Gain: High)
0.04 lx (at F1.4, B/W mode, Gain: High)
50 dB or more (AGC OFF)
Motorized zoom (x30 optical zoom)
Auto focus, auto iris lens, f=3.5 - 105 mm (F1.4 - 3.7)
Max. x16 (combined with optical zoom gives max. x480)
AUTO, MANUAL, and One-push (available by pressing SET button in Live mode)
AUTO: Switching to color or black/white mode automatically (AUTO, MID, HIGH).
COLOR: Fixing the video mode to color mode/Switching between color and black/white modes
automatically when an external alarm is input.
B/W: Fixes the video mode to black/white mode.
Multi-spot evaluative metering (MULT), Center-weighted average metering (CENT), and Masking for
backlight compensation (MASK)
Auto (ATW), Push-lock (AWC), Manual (MWB: R/B gain value adjustable), Indoor (3200), Outdoor
(5600), and fluorescent (FLUO)
LOW, NORMAL, MIDDLE, HIGH, and Off (Gain adjustable)
ON (Horizontal and Vertical compensation settings adjustable) and OFF
0.45, 1, MODE1 (Increases contrast), and MODE2 (Increases contrast further)
Fast shutter speeds (SHORT)
NTSC: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, and 1/10000
PAL: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, and 1/10000
Slow shutter speeds (LONG)
x1, x2, x4, x8, x16, and x32
ON/OFF (max. 16 characters, camera title position adjustable)
ON/OFF, max. 4 masks (when zoom maginifcation is WIDE)
OFF, x2, x4, x8, x16, and x32
ON/OFF
ON/OFF
Vertical (V), Horizontal (H), Vertical and Horizontal (VH), and OFF
ON (detection area size setting (SIZE), mask setting (MASKING), detection sensitivity setting
(SENSITIVITY), alarm disable duration setting DURATION)) and OFF
2 patters of camera settings storable (various camera conditions, zoom setting, etc.)
Menu screen (displayed by pressing SET button)
Control terminal x 2, NO (Normal Open) or NC (Normal Close)
Also used for Day/Night switching.
Control terminal x 1, NO/NC switching, open collector
Control voltage: ± (6 to 12) VDC
LAN terminal (RJ45 terminal), 10Base-T/100Base-TX
–10°C – +50°C, 90% RH max. (no condensation), –20°C – +50°C (continuously powered on)
24 VAC ± 10% (60 Hz for NTSC, 50 Hz for PAL), 12 - 15 VDC, PoE (Power over Ethernet)
7.3 W
89 / 153