Sanyo VCC-XZN600P Instruction Manual page 63

1
Use the / button to select [PASSWORD CHANGE], and press the SET button.
The PASSWORD <NOW PASSWORD> screen appears.
2
Use the / button to select the digit and use the
Repeat this procedure until the current password value (ex. 1234) is entered, and press the SET
button.
When the valid password is entered, the PASSWORD <NEW PASSWORD> screen appears.
3
Use the / button to select the digit and use the
Repeat this procedure until the new password value (ex. 4321) is entered, and press the SET
button.
"OK" appears under the <NEW PASSWORD> field, and the new password is set.
4
Select [MENU] and choose "BACK" or "END" to complete the setting.
/ button to select a number for the digit.
/ button to select a number for the digit.
63 / 153