Sanyo VCC-XZN600P Instruction Manual page 97

1
Start the Web browser.
To access the camera, Internet Explorer Ver.6.0 or higher is required.
When Internet Explorer is used for accessing the camera, the number of images sent from the
camera may be limited.
2
Type the URL for accessing the camera in the browser's address bar, and press [Enter] key.
Type the IP address configured for the camera following the "http://" characters.
After accessing the camera, the authentication dialog appears.
3
Complete the [User name] and [Password] fields, and click the [OK] button.
When accessing the camera for the first time, use the factory setting values below. Using these values, you will
be logged in as an administrative user.
User name : admin
Password : admin
After the values for the "User name" and "Password" fields are validated, the language selection screen appears.
4
Select the language used for display.
Available languages:
English, French, German, Spanish, Japanese
97 / 153