Lenovo BladeCenter HS23E Problem Determination And Service Manual page 216

v See Chapter 4, "Parts listing," on page 41 to determine which components are consumable, structural, or CRU
parts.
v If an action step is preceded by "(trained technician only)," that step must be performed only by a trained
technician.
Error code Description
089-802-xxx Aborted due a system resource availability
error.
202
BladeCenter HS23E Type 8038 and 8039: Problem Determination and Service Guide
Action
1. If the blade server has stopped responding, turn
off and restart the blade server. See "Turning off
the blade server" on page 12 and "Turning on
the blade server" on page 11.
2. Make sure that the DSA Diagnostic code is
up-to-date, upgrade if necessary; then, rerun the
test. The latest code can be found on the IBM
support Web site at http://www.ibm.com/
support/docview.wss?uid=psg1SERV-DSA.
3. Make sure that the system firmware level is
up-to-date, upgrade if necessary; then, rerun the
test. The installed firmware level can be found
in the DSA Diagnostic Event Log within the
Firmware/VPD section for this component. The
latest level firmware for this component can be
found on the IBM support Web site at
http://www.ibm.com/systems/support/
supportsite.wss/docdisplay?brandind=5000008
&lndocid=MIGR-63017.
4. If the blade server has stopped responding, turn
off and restart the blade server; then, rerun the
test. See "Turning off the blade server" on page
12 and "Turning on the blade server" on page
11.
5. (Trained technician only) If the component
failure remains, refer to Chapter 5, "Removing
and replacing blade server components," on
page 47 to replace the failed component.