Lenovo BladeCenter HS23E Problem Determination And Service Manual page 136

122
BladeCenter HS23E Type 8038 and 8039: Problem Determination and Service Guide
v Follow the suggested actions in the order in which they are listed in the Action
column until the problem is solved.
v See Chapter 4, "Parts listing," on page 41 to determine which components are
consumable, structural, or CRU parts.
v If an action step is preceded by "(Trained technician only)," that step must be
performed only by a trained technician.
Diagnostic
code Message
W.3058009 [W.3058009] Driver
health protocol:
missing
configuration.
Requires change
settings From F1.
W.305800A [W.305800A] Driver
health protocol:
Reports "failed"
status controller.
W.305800B [W.305800B] Driver
health protocol:
Reports "reboot"
required controller.
W.305800C [W.305800C] Driver
health protocol:
Reports "system
shutdown"
required controller.
Description Action
DRIVER HEALTH
1. Select System Settings
PROTOCOL:
Missing
find a driver/controller reporting
Configuration.
configuration required status.
Requires Change
2. Search for the driver menu from
Settings From F1.
System Settings and change the
settings appropriately.
3. Save the settings and restart the
system.
DRIVER HEALTH
1. Restart the system.
PROTOCOL:
2. If the problem persists, switch to
Reports 'Failed'
the backup UEFI image or reload
Status Controller.
the current UEFI image.
3. (Trained technician only) Replace
the system board (see "Removing
the system-board assembly" on
page 90 and "Installing the
system-board assembly" on page
91).
DRIVER HEALTH
1. No action required. The system
PROTOCOL:
will reboot at the end of POST.
Reports 'Reboot'
2. If the problem persists, switch to
Required
the backup UEFI image or reload
Controller.
the current UEFI image.
3. (Trained technician only) Replace
the system board (see "Removing
the system-board assembly" on
page 90 and "Installing the
system-board assembly" on page
91).
DRIVER HEALTH
1. Restart the system.
PROTOCOL:
2. If the problem persists, switch to
Reports 'System
the backup UEFI image or reload
Shutdown'
the current UEFI image.
Required
3. (Trained technician only) Replace
Controller.
the system board (see "Removing
the system-board assembly" on
page 90 and "Installing the
system-board assembly" on page
91).
Settings
Driver Health Status List and