Table of Contents
Advertisement
Steps
9.1.4 Network settings (1400)
About this task
Steps
Instructions for use
1. Select User > 1300 Operational Settings > 1340 Exposure Settings.
2. Select:
•
Continuous Exposure Indicator
Turn this option ON if you wish to set the X-ray unit so that the yellow
radiation warning light stays on continuously (instead of flashing)
when you take an exposure.
Note that the setting affects all indicator lights that are connected to
your X-ray system (indicator light on the hand-held exposure switch,
wall exposure switch(es) and remote exposure lamp).
•
Scout Settings
Select the default angle (anatomical or LAT-PA) for scout images in
3D Tooth Program.
3. Select the green check mark button.
Follow these steps to view network settings.
1. Select User > 1400 Network Settings.
2. Select the network settings you wish to view.
9 Settings
KaVo ProXam
59
Advertisement
Table of Contents
