Table of Contents
Advertisement
9.2.4 Reset to Factory Defaults (2500)
About this task
Steps
Instructions for use
4. Select the green check mark button.
5. Repeat for other program licences if needed.
6. Select the green check mark button.
Follow these steps to reset to factory defaults.
1. Select Program > 2500 Reset to Factory Defaults.
The function will restore the exposure values that have been preset at
the factory (i.e. overrule your own settings in menu Programs (2100)).
The preset exposure values for 3D patient exposures are shown in
section "Adjusting exposure values for current exposure" on page 39.
2. Select the green check mark button.
9 Settings
KaVo ProXam
65
Advertisement
Table of Contents
