Patient Exposure; Preparing X-Ray System; Attaching And Removing Sensor - KaVo ProXam 3DQ Instructions For Use Manual

8 3D patient exposure

8.1 Preparing X-ray system

8.1.1 Attaching and removing sensor

8.1.1.1 Attaching sensor to C-arm
Steps
Instructions for use
CAUTION
Do not drop the sensor. KaVo limited warranty does not cover damage which
is due to misuse, e.g. dropping the sensor, neglect, or any cause other than
ordinary use.
If you have any reason to believe that the sensor might be faulty, take a test
exposure before taking a patient exposure.
NOTE
The available sensors are shown in section "Sensor" on page 12.
1. Push the sensor onto the connector on the C-arm.
8 3D patient exposure
KaVo ProXam 25