Changing The Turbine Handpiece Settings In The Memodent Menu - KaVo ESTETICA E50 Life Instructions For Use Manual

Instructions for use ESTETICA E50 Life
4 Operation | 4.7 Using functions through the menu
To save the instrument-specific values, there are 3 memory levels (1, 2, 3)
each for six dentists (dentist 1 to dentist 6).
In level E, the centring of the foot pedal is deactivated, and no preferential
speed can be programmed.
4.7.4 Changing the turbine handpiece settings in the
MEMOdent menu
NOTE
Follow the instructions for use, service instructions and installation instruc-
tions in the instrument packaging.
The following settings can be changed in the MEMOdent menu:
▪ Speed
▪ Cooling status
▪ Cold light intensity
4 Remove the turbine handpiece from the holder.
4 Briefly press "Preselect level" key to select the level.
4 Press "Preselect level" button for 4 seconds in order to change settings.
ð The display switches to the turbine handpiece setting menu.
4 Press the "Save" key to save the values. You can save after setting each
value, or after setting all values.
ð Saving is acknowledged by a beep.
Setting the speed
4 Press the "Decrease value" key to decrease the speed.
or
4 Press the "Increase value" key to increase the speed.
ð The speed is shown in the display.
Setting the cooling status
4 Adjust the cooling with the selection button for "Cooling status".
Key Function
No cooling
Spray air cooling status
Spray cooling status
Cooling status NaCl (optional accessories)
Requirement:
NaCl is preselected via the foot control.
Activation via cross switch.
Also refer to:
Foot control
68 / 152