Table of Contents
Advertisement
8 3D patient exposure
8.7 Adjusting volume position
42
KaVo ProXam
NOTE
The CALM algorithm is for use only on live patients and is not
recommended for use, for example, in imaging involving an inorganic
sample or QA phantom attachment.
The volume positions are preset at the factory for a standard patient. As
all patients and their anatomical structures are different, however, you must
check that the preset position covers the area of interest for this patient. If
this is not the case, adjust the volume position according to the patient's
anatomy. The positioning lights and the illustrations on the touch screen help
you to do this.
NOTE
The following illustrations are guidelines only. When you adjust the volume
position, the positioning lights move on your patient's face. The positioning
lights on the illustrations show the preset volume position, and do not move
according to your adjustments.
Instructions for use
Advertisement
Table of Contents
