Patient Positioning; Selecting Patient Entry Position; Positioning Patient's Head - KaVo ProXam 3DQ Instructions For Use Manual

8.4 Patient positioning

8.4.1 Selecting patient entry position

Steps

8.4.2 Positioning patient's head

Steps
Instructions for use
1. Use the buttons on the right of the screen to select the patient entry
position.
• Select this button to move the C-arm to the back, away from the
patient positioning area. This full view position allows you to monitor
and adjust the patient's position freely from all directions.
• Select this button to position the C-arm around the patient support
table. This is the traditional closed patient entry position.
NOTE
If needed, the full view position (top button) can be disabled (Settings
> User > 1300 Operational settings > 1330 Patient positioning > Side
entry OFF). This might be necessary if there is no space for the C-arm to
move back.
1. Guide the patient to the X-ray unit.
The patient can sit or stand during the exposure.
8 3D patient exposure
KaVo ProXam 37