8.3.3 Selecting volume diameter and height
Steps
8.3.4 Selecting volume position
Steps
Instructions for use
NOTE
The patient size can also be selected on the next screen.
1. Select one of these buttons to set the diameter and height of the image
volume.
NOTE
Depending on the program selected, only one of the options may be
available.
2. Press the green checkmark button to confirm selections.
NOTE
The available options depend on the selected program. For more
information on KaVo ProXam 3DQ programs, see section "KaVo
ProXam 3DQ programs" on page 24.
1. Touch the area that you wish to expose.
Alternatively, select the volume position from the drop-down menu at the
top.
8 3D patient exposure
KaVo ProXam
35