Table of Contents
Advertisement
9 Settings
9.1.5 Testing routines (1500)
9.1.5.1 Test exposure
About this task
Steps
60
KaVo ProXam
3. Select the green check mark button.
NOTE
Only a service technician or local administrator may change the network
settings.
Follow these steps to take a test exposure.
1. Select User > 1500 Testing Routines > 1510 Test Exposure.
2. Use the minus or plus buttons to set the exposure values you wish to
use.
3. Select the SET button.
4. Move to a protected area.
5. Press and hold down the exposure button for the duration of the
exposure.
The C-arm will not move when you take a test exposure.
Instructions for use
Advertisement
Table of Contents
