Table of Contents
Advertisement
9.2.2 Program features (2200)
About this task
Steps
Instructions for use
8. Select the green check mark button.
NOTE
Always try to minimise the radiation dose to the patient.
NOTE
You can restore the exposure values that have been preset at the factory
(i.e. overrule your own settings) by selecting Program > 2500 Reset to
Factory Defaults.
NOTE
You can adjust the preset exposure values temporarily as described in
section "Adjusting exposure values for current exposure" on page 39.
Follow these steps to manage program settings.
1. Select Program > 2200 Program Features to manage program settings.
For details on a specific setting, refer to the Instructions for use section
that contains the corresponding function.
9 Settings
KaVo ProXam
63
Advertisement
Table of Contents
