Table of Contents
Advertisement
Results
8.9 Taking 3D exposure
About this task
Instructions for use
6. Use the plus and minus signs that appear on the touch screen.
7. Take a new exposure as described above.
Repeat the procedure until the image volume is in the correct place.
NOTE
The scout view function yields results for Jaw and Face programs that look
different to the scouts for Tooth and Teeth programs.
NOTE
See section "Operational settings (1300)" on page 56 for setting default
scout angle for Tooth program.
NOTE
Make sure that you have selected the correct patient and exposure mode in
the Romexis program.
8 3D patient exposure
KaVo ProXam
49
Advertisement
Table of Contents
