Inside The Top Cover - Canon IX-R7000 Operation Manual

Inside the Top Cover

Interior of the top cover.
a
d
a Card case
*1
Up to 250 cards can be loaded at one time.
You can adjust the gate gap to match the
thickness of the fed cards. The factory default is
set so the gap corresponds to feeding of cards
of 0.76 mm in thickness.
→See "Loading Cards" on page 7 for instructions on
loading cards and details about which cards you can
use.
→See "Adjusting the Feed Gate Depending on Card
Thickness" on page 43 for instructions on adjusting
the gate gap.
b Feeding roller
Pulls loaded cards into the printer.
→See "Cleaning the Feeding Roller" on page 62 for
feeding roller cleaning instructions.
*1 When using CR-80 cards (size: 3.375" x 2.125" (86 mm x 54 mm), thickness: 0.03" (0.76 mm)).
Part Names and Descriptions
c Top access cover
Open when cleaning the transport roller or
reverse roller.
→See "Cleaning the Transport Roller" on page 63 for
instructions on how to eject jammed cards.
→See "Cleaning the Reverse Roller" on page 65 for
instructions on how to eject jammed cards.
d Card case lock
When loading cards, pull the lock to open the
card case.
→See "Loading Cards" on page 7 for instructions on
loading cards.
b
c
2