Xerox AltaLink B8145 Series User Manual page 326

Troubleshooting
4. To remove the staple cartridge, grasp the orange handle, then pull the handle toward you.
5. Check inside the finisher for any loose staples, then remove the staples.
6. To open the staple cartridge clamp, pull the clamp in the direction shown.
7. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks into the locked
position.
W W a a r r n n i i n n g g : :
The points of the jammed staples are sharp. Remove the jammed staples carefully.
326
Xerox ® AltaLink ® B8145/B8155/B8170 Series Multifunction Printer User Guide