Xerox AltaLink B8145 Series User Manual page 205

1. At the high capacity feeder, squeeze the handle, and pull out Tray 6 until it stops.
2. Open the side gate. Remove the screw that holds the spacer plate at the back of the tray, then lift the spacer
plate out of the tray. Repeat the procedure for the spacer plate at the front of the tray.
3. For the rear spacer plate, place the tabs at the bottom of the plate into the slots that correspond with the
correct paper size. Slide down the spacer plate, then engage the peg on the top of the tray with the matching
hole in the spacer plate. To secure the spacer plate, install the screw. Repeat the procedure for the spacer plate
at the front of the tray.
Xerox ® AltaLink ® B8145/B8155/B8170 Series Multifunction Printer User Guide
Paper and Media
205