Lenovo Converged HX Series Installation And Service Manual page 202

Message:
Battery voltage is too low
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. If the error recurs, replace the battery.
• Diagnostic Code:
0201029C
Full Sensor Name (Sensor Name In SDR):
BAT_Volt
Sensor Type:
Voltage
Event Severity:
Critical
Description:
Lower Critical - Going Low - Asserted
Message:
Battery voltage is too low
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. If the error recurs, replace the battery.
• Diagnostic Code:
0201009C
Full Sensor Name (Sensor Name In SDR):
BAT_Volt
Sensor Type:
Voltage
Event Severity:
Warning
Description:
Lower Non-Critical - Going Low - Asserted
Message:
Battery voltage is too low
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. If the error recurs, replace the battery.
• Diagnostic Code:
086F06A0
Full Sensor Name (Sensor Name In SDR):
188
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide