Lenovo Converged HX Series Installation And Service Manual page 55

Note that when the BMC interface (Jviewer) is used to set the boot options as shown above, it introduces
listed but unselected options in the NVRAM. Below is an example of the output from SCE which shows all of
the boot options:
Setup Question = BBS_TYPE_HARDDRIVE Boot Option #
Token =AC // Do NOT change this line
Offset =00
Width =02
ListOrder = [0021]BBS_TYPE_HARDDRIVE 0021
[0024]BBS_TYPE_HARDDRIVE 0024
[0019]BBS_TYPE_HARDDRIVE 0019
[001a]BBS_TYPE_HARDDRIVE 001a
[001b]BBS_TYPE_HARDDRIVE 001b
[001c]BBS_TYPE_HARDDRIVE 001c
[001d]BBS_TYPE_HARDDRIVE 001d
[001e]BBS_TYPE_HARDDRIVE 001e
.
Chapter 2 Configuration information and instructions
41