System-Board Switches And Jumpers - Lenovo Converged HX Series Installation And Service Manual

Ethernet connector Video
(dedicated connector
management port)
Figure 10. External connectors on the system board

System-board switches and jumpers

The following illustration shows the location and description of the switches, jumpers, and buttons.
Important:
1. Before you change any switch settings or move any jumpers, turn off the server; then, disconnect
external cables. Review the information in "Safety" on page iii, "Installation guidelines" on page 79, and
"Turning off the server" on page 23.
USB
connectors
.
Chapter 1 The Converged HX Series Type 8689
19