Rear View - Lenovo Converged HX Series Installation And Service Manual

When this LED is lit (green), it indicates that the node has power.
• System error/LED:
When this LED is lit (yellow), it indicates that a system error has occurred. Check the event log for
additional information.
• ID button/LED:
The system administrator can remotely light this LED to aid in visually locating the compute node. When
this LED is lit, the identify LED on the chassis is also lit.

Rear view

The following illustration shows the connectors and LEDs on the rear of the server.
Low-profile PCIe slot (Optional)
ID button
/ LED
System error
LED
Power button
HDD status
/ LED
LED
Figure 7. Connectors on the rear of the server
The following illustration shows the rear view of the entire system.
Power cord
Power supply 1 connectors
Power supply 2
Figure 8. The rear view of the entire system
• Power button/LED: When this LED is lit (green), it indicates that the node has power.
• System error/LED: When this LED is lit (yellow), it indicates that a system error has occurred. Check the
event log for additional information.
• ID button/LED: The system administrator can remotely light this LED to aid in visually locating the
compute node. When this LED is lit, the identify LED on the chassis is also lit.
• Hard disk drive LED: When this LED is lit, it indicates that one or more hard disk drive has failed.
• Low-profile PCIe slot (optional): Support one PCI Express Gen3 low-profile, half-length adapter.
• Ethernet connectors: Use this dedicated management port to connect the server to a network. When
you use the Ethernet 1 connector, the network can be shared with the TMM through NC-SI interface.
Dual-port Ethernet connector
network adapter (dedicated
(Optional; shared management port)
management port)
Node 4
Node 2
USB connectors
Video connector
Node 3
Node 1
.
Chapter 1 The Converged HX Series Type 8689
15