Lenovo Converged HX Series Installation And Service Manual page 214

Catastrophic error happened.
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. Restart the server.
3. Power cycle the node.
4. If the error remains, contact Lenovo service representative for execution of processor replacement.
• Diagnostic Code:
070301D1
Full Sensor Name (Sensor Name In SDR):
CPU_VR_Fault
Sensor Type:
Processor
Event Severity:
Critical
Description:
State Asserted - Asserted
Message:
CPU VR fault.
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. Restart the server.
3. Power cycle the node.
4. If the error remains, contact Lenovo service representative for execution of processor replacement.
• Diagnostic Code:
0C0301D2
Full Sensor Name (Sensor Name In SDR):
Mem_Therm_Trip
Sensor Type:
Memory
Event Severity:
Critical
Description:
State Asserted - Asserted
Message:
Memory temperature is too high. At the same time, system will be shut down.
Actions:
1. Check Lenovo Data Center Support site for an applicable retain tip or firmware update that applies to
this error.
2. Check the status of the fans. If any of the fans is broken, replace it with a new one.
200
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide