Recovery Bios Function; Recovery Bios Function By Sw1 - Lenovo Converged HX Series Installation And Service Manual

Recovery BIOS function

This section details the recovery BIOS function.
The BIOS support the book block to re-flash the mail BIOS image when the BIOS is be corrupted and cannot
boot to the EFI Shell or operating system to perform a standard update.
Recovery BIOS step:
Step 1. Insert USB key (this USB key need include the Recovery ROM file "AMIBOOT.ROM").
Step 2. Power on the server and wait system into recovery mode in setup menu.
Step 3. Select "Proceed with flash update" and Enter to start flash update.

Recovery BIOS Function by SW1

This section details the recovery BIOS Function by SW1.
Step 1. Pull out the node and place SW1 DIP1 to "ON" location.
66
Lenovo Converged HX3710, HX2710-E, HX3710-F Type 8689, Lenovo Converged HX Enclosure Type 5495 Installation and Service Guide