Installing The Unit - Henny Penny FlexFusion FSE-610 Installation Manual

Prerequisite
7

Installing the unit

SAFETY INSTRUCTIONS
Danger due to heavy weight of the unit (over 60 kg)
a) Erect the unit with several people.
b) Raise / lower the unit with suitable lifting equipment.
CAUTION
Risk of crushing the fingers and hands when lifting and lowering the unit on
the shelf plate
a) Always lift and lower the unit carefully (with suitable lifting tool) with two
people.
➢ Unit is fully mounted.
➢ Electrical installation is connected on the unit side.
➢ Water installation is connected on the unit side.
➢ Drainage installation is connected on the unit side.
➢ Shelf plate lies securely and firmly on a solid base / table on trussing /
slats (approx. 60 x 40 mm (2.4 x 1.6 in)).
Support shelf plate on trusses
a) Align shelf plates to trusses.
⇨ Stop bolts on the shelf plate secure the unit from sliding away. The
shelf is not secured.
b) Bending of the front edge of the shelf plate projects downwards.
⇨ Circumferential edge protects the installation (e.g. cabinet) against
moisture and condensate. Excess moisture flows away.
Installing the unit
7
35