RadioLink AT9S Pro Instruction Manual page 82

深圳市乐迪电子有限公司
www.radiolink.com
Thanks
Thank you very much for purchasing the 12-channel transmitters AT9S Pro produced by RadioLink
Electronics Co., Ltd. (The factory default is 10 channels. If you need to use 12 channels, you can enter the
BASIC menu- SYSTEM- CH SELECT to change it to CH12, which is compatible with 12-channel receivers.
If the channel of the receiver is less than 12, please change it back to 10CH). In order to better use the
transmitter and ensure safe flight, please read the instruction carefully. When compiling the instruction, we
try our best to use familiar names and expressions to make it easy for beginners to read.
Suggestion: When you read this manual, please turn on the transmitter and receiver and connect the
receiver to the servos and other related equipment, and operate while reading. When you read these
instructions, if you encounter difficulties, please refer to this manual or contact our after-sales
service:after_service@radiolink.com.cn and visit our official website: https://www.radiolink.com/ to find
out answers.
The USB port of AT9S Pro is used to upgrade firmware and add new functions. The added functions will
not be modified in the manual. For more information, please visit the official website of RadioLink:
https://www.radiolink.com/ thank you!
Thank you again for choosing our products !
82