Trainer - RadioLink AT9S Pro Instruction Manual

• Also the reset switch can be assigned (SWITCH A-H or LOGIC SWITCH Lsw1-Lsw3)

2.14 TRAINER

For training novice pilots with optional trainer cord connecting 2 transmitters. The instructor has several
levels of control.
Mode: Hold/Trigger
Hold: Keep pushing the trainer switch (SWH) to make the drone
controlled by instructor transmitter. If you loosen the SWH, it will switch to
be controlled by student transmitter.
Trigger: Push the trainer switch(SWH) once to make the drone controlled
by instructor transmitter. Push the trainer switch(SWH) once again to
make the drone controlled by student transmitter.
Adjustability:
• NORM: When the TRAINER SWITCH is ON, the channel set to this
mode can be controlled by the student. The set channel is controlled according to any programming set at the
student's transmitter.
• FUNC: When the TRAINER SWITCH is ON, the channel set to this mode can be controlled by the student,
controlled according to any mixing set at the instructor's transmitter.
• MIX: When the TRAINER SWITCH is ON, the channel set to this mode can be controlled by both the
student and the instructor, controlled according to any mixing set at the instructor's transmitter. And the
student's mixing rate is adjustable. (Default 30%)
[Note] However, it becomes invalid even if it sets up the channel which is not in a student's transmitter. The
channel serves as operation by the instructor's transmitter automatically.
• OFF: The channel set to this mode cannot be controlled by the student even when the TRAINER SWITCH
is ON. The set channel is controlled by the instructor only, even when the TRAINER SWITCH is ON.
• SWITCH: controlled by spring-loaded SWITCH H only. Not assignable.
• Compatibility: The AT9S Pro may be master or student with any Radiolink transmitter compatible with the
cord. Simply plug the optional trainer cord (For AT9S Pro series, sold separately) into the trainer connection
on each transmitter, and follow the guidelines below.
EXAMPLES:
•When throttle/collective is set to FUNG, 5-channel helicopter practice is possible with a 4-channel
transmitter.
• Set up the model in a second transmitter, use NORM mode to quickly and safely check proper operation of
all functions, and then allow the student radio to fully fly the model.
• Using NORM mode, set lower throws, different exponentials, even different auxiliary channel settings on
the student radio (if it has these features).
Assign switch at ST-THK and
set trigger point.
Close
to SWA TIMER<2>，，
Throttle Stick down to 50%,PUSH for 1s to
NULL.
Throttle Stick down to desired position(Ex:1/4
stick) PUSH button for 1s to set.
34
to ST-THK，PUSH
【TRAINR】
MIX: INH
1：AILE FUNC
2：ELEV FUNC
3：THRO FUNC
4：RUDD FUNC
5：GEAR FUNC
6：FLAP FUNC
7：AUX1 FUNC
8：AUX2 FUNC