spoiler servo position
Activate the function.
to 60%
Assign the SPO2-CH.(Ex:
CH3)
Adjust the spoiler servo
position. (Ex:
SPO1/SPO2=+55% to
Optional: Set the elevator
rate.(Ex:10%)
Optional: set the delay.
(Ex:25%)
Close
3.2.10 FLAP-TRIM
The setting of FLAP-TRIM of glider is the same with that of acrobasic. Click here or go to page 44 to check the
detailed setting method.
3.2.11 CONDITION
Channel 3's function is selectable in the ARBK-FUNC item.
(Throttle stick, switches, or knobs) By choosing except STK,
channel 3's function may be separated from Butterfly's function,
so channel 3 can be used for other functions.
Adjustability:
• Channel 3's function:
STK: THROTTLE STICK
Sw-A to H: SWITCH A to H
Vr-A to Vr-E: KNOB A to E
3.2.12 SERVO-DLY
The setting of SERVO-DLY of glider is the same with that of acrobasic. Click here or go to page 56 to check
the detailed setting method.
3.2.13 BUTTERFLY (crow) mixing
to MIX
,
to –SPO2- CH
to –SPO1-POSI to -50%,
to –SPO2-POSI to +50%,
to –rate- ELEV
to –dly- ELEV
BUTTERFLY simultaneously moves the flaps, twin ailerons
62
深圳市乐迪电子有限公司
www.radiolink.com
to ON.
to CH3,
,
to 60%,
,
to 60%,
,
to 10%,
,
to 25%,
,