Tftp Client Configuration Example (On The Sr6604/6608/6616 Router) - H3C SR6600 Fundamentals Configuration Manual

The boot file used for the next startup must be saved under the root directory of the storage medium
(For a device that has been partitioned, the boot file must be saved on the first partition). You can copy
or move a file to the root directory of the storage medium. For the details of the boot-loader command,
see Software Upgrade in the Fundamentals Command Reference.
TFTP Client Configuration Example (On the SR6604/6608/6616
router)
Network requirements
As shown in
addresses are 1.2.1.1/16 and 1.1.1.1/16 respectively. Device and PC are reachable to each other.
Device downloads a boot file from PC for upgrading and uploads a configuration file named
config.cfg to PC for backup.
Figure 7-3 Smooth upgrading using the TFTP client function
Configuration procedure
1) Configure the PC (TFTP Server), the configuration procedure is omitted.
On the PC, enable the TFTP server
Configure a TFTP working directory
2) Configure Device (TFTP Client)
If the available memory space of the device is not enough, use the fixdisk command to clear the
memory or use the delete /unreserved file-url command to delete the files not in use and then perform
the following operations.
# Download application file newest.bin from PC to the device.
Download application file newest.bin from PC to the root directory of the storage medium on the
AMB.
<Sysname> tftp 1.2.1.1 get newest.bin
Download application file newest.bin from PC to the root directory of the storage medium on the
SMB (in slot 1).
Figure 7-3, use a PC as the TFTP server and Device as the TFTP client. Their IP
7-106