Configuring Scheme Authentication For Modem Login - H3C SR6600 Fundamentals Configuration Manual

To do...
Configure common settings for
VTY user interfaces
After the configuration, when you log in to the device through modems, you are prompted to enter a
login password. A prompt such as <H3C> appears after you input the password and press Enter, as
shown in Figure
Figure 3-31 Configuration page

Configuring Scheme Authentication for Modem Login

Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see
Requirements.
Configuration procedure
Follow these steps to configure scheme authentication for modem login:
To do...
Enter system view
Enter AUX user interface
view
—
3-31.
Use the command...
system-view
user-interface aux first-number
[ last-number ]
Use the command...
3-69
Remarks
Optional
For more information, see
Configuring Common Settings for
VTY User Interfaces (Optional).
Configuration
Remarks
—
—