Backing Up The Startup Configuration File; Deleting A Startup Configuration File To Be Used At The Next Startup - H3C SR6600 Fundamentals Configuration Manual

A configuration file must use .cfg as its extension name and the startup configuration file must be saved
in the root directory of the storage medium.

Backing Up the Startup Configuration File

The backup function allows you to copy the startup configuration file to be used at the next startup from
the device to the TFTP server.
The backup operation backs up the main startup configuration file to the TFTP server for devices
supporting main and backup startup configuration files.
Follow the step below to back up the startup configuration file to be used at the next startup:
To do...
Back up the startup configuration
file to be used at the next startup to
the specified TFTP server
Before the backup operation:
Ensure that the server is reachable and enabled with TFTP service, and the client has the read and
write permission.
Use the display startup command (in user view) to check whether you have specified a startup
configuration file to be used at the next startup. If the file is set as NULL or does not exist, the
backup operation fails.

Deleting a Startup Configuration File to Be Used at the Next Startup

You can delete a startup configuration file to be used at the next startup at the CLI. On a device that has
main and backup startup configuration files, you can choose to delete either the main, the backup, or
both. If the device has only one startup configuration to be used at the next startup, the system only sets
the startup configuration file to NULL.
You may need to delete a startup configuration file to be used at the next startup for one of these
reasons:
After you upgrade system software, the existing startup configuration files do not match the new
system software.
Startup configuration files are corrupted (often caused by loading a wrong configuration file).
With startup configuration files deleted, the devices uses null configuration at the next startup.
Follow the step below to delete a startup configuration file to be used at the next startup:
Use the command...
backup startup-configuration to
dest-addr [dest- filename ]
9-125
Remarks
Required
Available in user view