H3C SR6600 Fundamentals Configuration Manual page 39

Step2 Launch a terminal emulation program (such as HyperTerminal in Windows XP/Windows 2000). The
following takes the HyperTerminal of Windows XP as an example. Select a serial port to be connected
to the device, and set terminal parameters as follows: set Bits per second to 9600, Data bits to 8,
Parity to None, Stop bits to 1, and Flow control to None, as shown in
On the Windows 2003 Server operating system, you need to add the HyperTerminal program first, and
then log in to and manage the device as described in this document. On the Windows 2008 Server,
Windows 7, Windows Vista, or some other operating system, you need to obtain a third party terminal
control program first, and follow the user guide or online help of that program to log in to the device.
Figure 3-2 Connection description
3-28
Figure 3-2 through Figure 3-4.