Nms Login Example - H3C SR6600 Fundamentals Configuration Manual

The device supports three SNMP versions: SNMPv1, SNMPv2C and SNMPv3. For more
information about SNMP, see SNMP in the Network Management and Monitoring Configuration
Guide.

NMS Login Example

In this example, iMC is used as the NMS for illustration.
1) Configuration on the device
# Assign 1.1.1.1/24 for the IP address of device. Make sure the device and the NMS can reach each
other. (Configuration steps are omitted.)
# Enter system view.
<Sysname> system-view
# Enable the SNMP agent.
[Sysname] snmp-agent
# Configure an SNMP group.
[Sysname] snmp-agent group v3 managev3group read-view test write-view test
# Add a user to the SNMP group.
[Sysname] snmp-agent usm-user v3 managev3user managev3group
2) Configuration on the NMS
On the PC, start the browser. In the address bar, enter http://192.168.4.112:8080/imc, where
192.168.4.112 is the IP address of the iMC.
3-78