Configuring Scheme Authentication For Aux Login - H3C SR6600 Fundamentals Configuration Manual

Configuring Scheme Authentication for AUX Login

Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the AUX port with password authentication and have
user privilege level 0 after login. For how to log in to the device with default configuration, see
Configuration Requirements.
Configuration procedure
Follow these steps to configure scheme authentication for AUX login:
To do...
Enters system view
Enter one or more AUX user
interface views
Specify the scheme authentication
mode
Enable command authorization
Use the command...
system-view
user-interface aux first-number
[ last-number ]
authentication-mode scheme
command authorization
3-54
Remarks
—
—
Required
By default, the authentication
mode for users that log in through
the AUX port is password.
Optional
By default, command
authorization is not enabled.
By default, command level for
a login user depends on the
user privilege level. The user
is authorized the command
with the default level not
higher than the user privilege
level. With the command
authorization configured, the
command level for a login user
is determined by both the user
privilege level and
authorization. If
executes a command of the
corresponding command
level, the authorization server
checks whether the command
is authorized. If yes, the
command can be executed.
AAA
a user