Ftp Server Configuration Example (On The Sr6604/6608/6616 Router) - H3C SR6600 Fundamentals Configuration Manual

331 Password required for ftp.
Password:
230 User logged in.
# Download the configuration file config.cfg of the device to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file newest.bin to Device.
ftp> put newest.bin
ftp> bye
You can take the same steps to upgrade configuration file with FTP. When upgrading the
configuration file with FTP, put the new file under the root directory of the storage medium (For a
device that has been partitioned, the configuration file must be saved on the first partition.).
After you finish transferring the Boot ROM program through FTP, you must execute the bootrom
update command to upgrade the Boot ROM.
3) Upgrade Device
# Specify newest.bin as the main boot file to be used at the next startup.
<Sysname> boot-loader file newest.bin main
# Reboot the device and the boot file is updated at the system reboot.
<Sysname> reboot
The boot file used for the next startup must be saved under the root directory of the storage medium
(For a device that has been partitioned, the boot file must be saved on the first partition). You can copy
or move a file to the root directory of the storage medium. For the details of the boot-loader command,
see Software Upgrade in the Fundamentals Command Reference.

FTP Server Configuration Example (On the SR6604/6608/6616 router)

Network requirements
As shown in
addresses are 1.2.1.1/16 and 1.1.1.1/16 respectively. Device and PC are reachable to each other.
PC keeps the updated boot file of the device. Use FTP to upgrade the device and back up the
configuration file.
Set the username to ftp and the password to pwd for the FTP client to log in to the FTP server.
Figure 6-5, use Device as an FTP server, and the PC as the FTP client. Their IP
6-98