Configuring Password Authentication For Aux Login - H3C SR6600 Fundamentals Configuration Manual

Configuring Password Authentication for AUX Login

Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see
Requirements.
Configuration procedure
Follow these steps to configure password authentication for AUX login:
To do...
Enters system view
Enter one or more AUX user
interface views
Specify the password
authentication mode
Set the local password
Configure common settings for
AUX login
After the configuration, when you log in to the device through the AUX port at the next time, you are
prompted to enter a login password. A prompt such as <H3C> appears after you input the password
and press Enter, as shown in
Figure 3-18 Configuration page
Use the command...
system-view
user-interface aux first-number
[ last-number ]
authentication-mode password
set authentication password
{ cipher | simple } password
—
Figure 3-18.
3-53
Configuration
Remarks
—
—
Required
By default, you can log in to the
device through the AUX port with
password authentication and have
user privilege level 0 after login.
Required
By default, no local password is
set.
Optional
See Configuring Common Settings
for AUX Login (Optional).