H3C SR6600 Fundamentals Configuration Manual page 118

<Sysname> tftp 1.2.1.1 get newest.bin slot1#cfa0:/newest.bin
# Upload a configuration file config.cfg to the TFTP server.
<Sysname> tftp 1.2.1.1 put config.cfg configback.cfg
# Specify newest.bin as the main boot file to be used at the next startup.
Specify newest.bin as the main boot file to be used at the next startup for the AMB.
<Sysname> boot-loader file newest.bin slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 0!
Specify newest.bin as the main boot file to be used at the next startup for the SMB (in slot 1).
<Sysname> boot-loader file slot1#cfa0:/newest.bin slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
# Reboot the device and the software is upgraded.
<Sysname> reboot
The boot file used for the next startup must be saved under the root directory of the storage medium
(For a device that has been partitioned, the boot file must be saved on the first partition). You can copy
or move a file to the root directory of the storage medium. For the details of the boot-loader command,
see Software Upgrade in the Fundamentals Command Reference.
7-107