Configuring Password Authentication For Modem Login - H3C SR6600 Fundamentals Configuration Manual

To do...
Configure common settings for
VTY user interfaces
After the configuration, when you log in to the device through modems, you are prompted to press
Enter. A prompt such as <H3C> appears after you press Enter, as shown in
Figure 3-30 Configuration page

Configuring Password Authentication for Modem Login

Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see
Requirements.
Configuration procedure
Follow these steps to configure password authentication for modem login:
To do...
Enter system view
Enter one or more AUX user
interface views
Specify the password
authentication mode
Set the local password
Use the command...
—
Use the command...
system-view
user-interface aux first-number
[ last-number ]
authentication-mode password
set authentication password
{ cipher | simple } password
3-68
Remarks
Optional
See Configuring Common Settings
for VTY User Interfaces (Optional).
Figure 3-30.
Configuration
Remarks
—
—
Required
By default, the modem login
authentication mode of the device
is password.
Required
By default, no local password is
set.