Manually Saving The Current Running Configuration; Setting Configuration Rollback - H3C SR6600 Fundamentals Configuration Manual

To do...
Enable the automatic saving of the
current running configuration, and
set the interval
The path and filename prefix for saving configuration files must be specified before you configure the
automatic saving period.

Manually Saving the Current Running Configuration

Automatic saving of the current running configuration occupies system resources, and frequent saving
greatly affects system performance. Therefore, if the system configuration does not change frequently,
you are recommended to disable the automatic saving of the current running configuration and save it
manually.
In addition, automatic saving of the current running configuration is performed periodically, and manual
saving can immediately save the current running configuration. Therefore, before performing
complicated configuration, you can manually save the current running configuration so that the device
can revert to the previous state when the configuration fails.
Follow the step below to manually save the current running configuration:
To do...
Manually save the current running
configuration
Specify the path and filename prefix of a save configuration file before you manually save the current
running configuration; otherwise, the operation fails.

Setting Configuration Rollback

Follow these steps to set configuration rollback:
To do...
Enter system view
Set configuration rollback
Use the command...
archive configuration interval
minutes
Use the command...
archive configuration
Use the command...
system-view
configuration replace file
filename
9-123
Remarks
Optional
Disabled by default
Remarks
Required
Available in user view
Remarks
—
Required