Activating Patches; Confirming Running Patches - H3C SR6600 Fundamentals Configuration Manual

Activating Patches

After you activate a patch, the patch takes effect and is in the test-run stage. After the device is reset or
rebooted, the patch becomes invalid.
If you find that an ACTIVE patch is of some problem, reboot the device to deactivate the patch, so as to
avoid a series of running faults resulting from patch error.
Follow these steps to activate patches: (On the SR6602 router)
To do...
Enter system view
Activate the specified patches
Follow these steps to activate patches: (On the SR6604/6608/6616 router)
To do...
Enter system view
Activate the specified patches

Confirming Running Patches

After you confirm the running of a patch, the patch state becomes RUNNING, and the patch is in the
normal running stage. After the device is reset or rebooted, the patch is still valid.
Follow these steps to confirm the running of the patches: (On the SR6602 router)
To do...
Enter system view
Confirm the running of the
specified patches
Follow these steps to confirm the running of patches: (On the SR6604/6608/6616 router)
To do...
Enter system view
Confirm the running of the
specified patches
This operation is applicable to patches in the ACTIVE state only.
Use the command...
system-view
patch active patch-number
Use the command...
system-view
patch active patch-number slot
slot-number
Use the command...
system-view
patch run patch-number
Use the command...
system-view
patch run patch-number [ slot
slot-number ]
12-144
Remarks
—
Required
Remarks
—
Required
Remarks
—
Required
Remarks
—
Required