Login Methods - H3C SR6600 Fundamentals Configuration Manual

2

Login Methods

This chapter includes these sections:
Login Methods
User Interface Overview
Login Methods
You can log in to a device in the following ways.
Table 2-1 Login methods
Login method
CLI Login
Logging In By default, you can log in to a device through the console port, the
Through the authentication mode is None (no username or password required),
Console Port and the user privilege level is 3.
By default, you cannot log in to a device through telnet. To do so, log in
to the device through the console port, and complete the following
configuration:
Enable the telnet function.
Logging In
Configure the IP address of the interface, and make sure that your
Through Telnet
device and the telnet client can reach each other (by default, the
device does not have an IP address.).
Configure the authentication mode of VTY login users (password
by default).
Configure the user privilege level of VTY login users (0 by default).
By default, you cannot log in to a device through SSH. To do so, log in
to the device through the console port, and complete the following
configuration:
Enable the SSH function and configure SSH attributes.
Logging In
Configure the IP address of the interface, and make sure that your
Through SSH
device and the SSH client can reach each other (by default, your
device does not have an IP address.).
Configure the authentication mode of VTY login users as scheme
(password by default).
Configure the user privilege level of VTY login users (0 by default).
By default, you cannot log in to a device through the AUX port. To do
so, log in to the device through the console port, and complete the
following configuration:
Logging In
Through the AUX Configure the password for the default password authentication
Port mode, or change the authentication mode and configure
parameters for the new authentication mode.
The default user privilege level of AUX login users is 0.
Logging In By default, you can log in to a device through modems. The default
Through Modems user privilege level of modem login users is 3.
Default state
2-23