Barco FSN-1004 User Manual page 190

6. Operations
Working with Memory Registers
The table below summarizes the functions you can perform in each mode:
Table 6-2. Memory Menu modes and functions
Memory Menu
Mode
View
Store
Recall
píçêáåÖ=jÉãçêó=oÉÖáëíÉêë
When you store a memory register, you take a "snapshot" of the switcher and the selected
modules. Once stored, you can not add data to that register — you can only overwrite it
with new data.
Storing a memory register and setting Enables is an easy equation. This method stores
partial contents of the selected module(s).
•
The following topics are discussed in this section:
•
•
píçêÉI=pÉí=bå~ÄäÉëI=båíÉê=`ìëíçã=k~ãÉ

Use the following steps to store a memory register, set Enables, and enter a custom
register description:
1.
2.
3.
4.
190
Multiviewer layouts, etc.). Using the System "Enables," you can elect to include or
exclude certain system sub-functions.
When you include the SYS button in a recall function, the system immediately
replaces all (or a portion of) the current System settings, based on your "enables."
You can also modify the Enables, prior to pressing ENTER .
Name
Registers
Yes
Yes
No

If you store All Output Destinations into register 100, you can not add
System data into that register. However, you could overwrite register 100
with new data.
STORE , [select register #] , [set Enables] , ENTER
Store, Set Enables, Enter Custom Name
Memory Store Notes
Note In Store Mode , the description will not appear in the register
table until ENTER is pressed on the Keypad .
Set up the switcher in the exact configuration that you want stored.
In the GUI , go to the Memory page, highlight a register number line in the table,
and select STORE .
Open the Enables Menu by selecting the brown Enables Button at the bottom of
the screen. By default all Enables are "Off" for the System and Output modules.
Choose the light blue SYS or OUT modules and turn ON the desired items to be
saved in this register. Remember that you can also use the {All On} and {All Off}
functions.
Modules Enables
View Only View Only
Modify Modify
Modify Modify
FSN-1004 • User's Guide • Rev 00
Lock Delete
Registers Registers
Yes Yes
No No
No No