M/E Card - Barco FSN-1004 User Manual

2)
3)
4)
5)
6)
7)
FSN-1004 • User's Guide • Rev 00
• Red = AC power is bad or has failed.
The FSN-1004 comes with a single power supply.
Fan Tray
For chassis cooling, one slot is provided for the required hot-swappable fan tray.
The integral handle enables the tray to be easily removed and installed.
Important The fan tray must be installed whenever power is applied to
the chassis. Operating the unit without the fan tray will cause
overheating and possible damage.
System Card
Slot 14 is populated with the System Card. Refer to the
on page 35 for details.
SOC Cards
Slots 12 and 13 are populated with the Standard Output Card. See the
"Standard Output Card" section on page 43.
MVR Card
Slot 11 is populated with the MVR (Multiviewer Card). See the
section on page 45.

M/E Card

Slot 8 is populated with the M/E (Mix/Effects) card. Refer to the
section on page 39 for details.
Input Cards
Slots 3 through 7 are populated with UICs (Universal Input Cards). Refer to the
"Universal Input Card" section on page 41 for details.
2. FSN-1004 Orientation
Hardware Description
"System Card" section
"Multiviewer
"M/E Card"
Card"
31