Barco FSN-1004 User Manual page 50

3. Installation
Safety Precautions
p~ÑÉíó=mêÉÅ~ìíáçåë=
For all FSN-1004 installation procedures, observe the following important safety and
handling rules to avoid damage to yourself and the equipment:
•
•
pÜáééáåÖ=fåÑçêã~íáçå
All FSN-1004 systems are shipped in one box as follows:
•
•
råé~ÅâáåÖ=~åÇ=fåëéÉÅíáçå=
Inspect the shipping boxes for damage. If you find any damage, notify the shipping carrier
immediately for all claims adjustments. As you open each box, compare its contents
against the packing slips. If you find any shortages, contact your Barco sales
representative.
Once you have removed all components from their packaging and checked that the listed
components are present, inspect each unit to ensure there was no shipping damage. If
there is damage, notify the shipping carrier immediately for all claims adjustments.
páíÉ=mêÉé~ê~íáçå=
The environment in which you install your FSN-1004 switcher should be clean, properly lit,
free from static, and have adequate power, ventilation, and space for all components.
`~ÄäÉ=~åÇ=^Ç~éíÉê=fåÑçêã~íáçå
The table below provides information regarding cables included with the FSN-1004:
50
To protect users from electric shock, ensure that the power supplies for each unit
connect to earth via the ground wire provided in the AC power cord.
AC Socket-outlets should be installed near the equipment and be easily
accessible.
Box 1
~
FSN-1004 chassis and cards
If a redundant power supply is ordered, it is shipped in its own box.
FSN-1004 • User's Guide • Rev 00