Barco FSN-1004 User Manual page 191

5.
6.
jÉãçêó=píçêÉ=kçíÉë
Please note the following important points regarding memory register storage:
•
•
•
FSN-1004 • User's Guide • Rev 00
Select Description to display the Keyboard and enter in the desired description
and press Enter on the Keyboard.
Note In Store Mode , the description will not appear in the register
table until ENTER is pressed on the Keypad .
Press ENTER on the Keypad . The register is stored, the Enables are set, and the
custom description is also stored.
If you are in the midst of a Store procedure, the {Advanced} button is grayed out.
This feature prevents you from locking, unlocking, or deleting registers in the
midst of the procedure.
At any point, prior to pressing ENTER , you can add or remove modules within a
pending Store operation
To add modules (prior to pressing ENTER ):
~
In the Enables Menu , press the light blue button for module you wish to
add (even if it was not originally selected). All Enables will be off initially,
but as soon as you toggle any Enable on, the associated module button
in the Keypad lights. You can also press {All On} .
To remove modules (prior to pressing ENTER ):
~
In the Enables Menu , press the light blue button for module you wish to
remove, and press {All Off} . The associated module button in the
Keypad turns off.
Remember that once ENTER is pressed, the module's contents are set — and
you can no longer add to the register. On recall, however, you can elect to recall
all of the register's contents, or part of the contents by using your Enables.
6. Operations
Working with Memory Registers
191