Barco FSN-1004 User Manual page 170

5. System Setup
Output Format Setup
lìíéìí=cçêã~í=pÉíìé
FSN-1004 system setup: Step 5
In this procedure, you will set up the system's output format (native resolution).
5

Set up format
1.
2.
3.
4.
170
— Use the following steps to set up the output format:
In the Menu Bar , press {System} to access the System Menu .
Press {Output Setup} to display the Output Setup Menu .
On the Output Setup Menu , press {M/E Format/Rate} to display the Output
Format Keypad .
Select the desired format and press {Apply} . In the confirmation pop-up, click
{Set Output Format} to confirm.
Important Remember that all input settings will be reset to their default
values when you change output formats.
FSN-1004 • User's Guide • Rev 00