Barco FSN-1004 User Manual page 177


Color Correction
1.
2.
3.
4.
5.
6.
7.
8.
FSN-1004 • User's Guide • Rev 00
— Use the following steps to set up SOC color correction:
On the Aux Setup Menu , press the SOC Aux connector that you want to set up.
Press {Setup} to display the SOC Setup Menu for the selected output.
Press {Color Correct} to display the Output Color Correction Panel .
To adjust the output's brightness, contrast and gamma, press {Bright Contrast
Gamma} . Use the {Bright} , {Contrast} and {Gamma} controls as desired.
To adjust the output's RGB brightness, press {RGB Bright} . Use the {Red
Bright} , {Green Bright} and {Blue Bright} controls as desired.
To adjust the output's RGB contrast, press {RGB Contrast} . Use the {Red
Contrast} , {Green Contrast} and {Blue Contrast} controls as desired.
To adjust hue and color saturation, press {Hue Sat} . Use the {Hue} and {Sat}
controls as desired.
Press {Back} to return to the Aux Setup Menu .
5. System Setup
Aux Output Setup
177